12-Volt Relay for switching 110-Volt or Push Switches This relay is not the 5-volt style - it is 12-Volts with a 10-AMP relay on board for high loads! Easy to install. Preset by us for optimal triggering.  

1" round RFID disk 125KHZ Easy to hide within any Item. Cover with felt and glue.   

Tiny Rice RFID Tag 125KHZ Easy to hide within any Item. Cover with felt and glue.   

Weatherproof Junction Box for Electrical Speed Controllers   Have a mechanism you're looking to use outside but afraid of the weather interfering? Look no further!   This junction box is great for keeping your haunts safe from the outside...

Normally Closed magnetic sensor with 2 wires.

Normally Open magnetic sensor with 2 wires.

This controller is the perfect way to add audio to your favorite mech or any future project you may have!    The only limitations for this controller is your imagination, due to the numerous inputs, you can wire sperate buttons and triggers...

22/4 AWG Stranded Conductor Cable Wire Sold by the foot, perfect for any prop wiring needs.

18/2 AWG Stranded Conductor Cable Wire Sold by the foot, perfect for any prop wiring needs.

22/2 AWG Stranded Conductor Cable Wire Sold by the foot, perfect for any prop wiring needs.

Frightimer INDOOR Trigger & Timer The Frightimer is a motion-sensing Professional prop trigger and timer. It is very easy to use. It comes with two mounting holes so you can easily secure the motion sensor wherever needed. It also includes a stand...

12-Volt Relay for switching 110-Volt or Push Switches This relay is not the 5-volt style - it is 12-Volts with a 10-AMP relay on board for high loads! Easy to install. Preset by us for optimal triggering.  

Control virtually any 110-volt electronic prop wirelessly, with the push of a button. Plug the receiver into the wall, and control all the action! Signal strength 50-100 feet.

Use this small motor to make items rotate in your haunt. Runs off anything 6-volts or less.

This small trigger has two wires and easily connects to prop controllers, solenoids, etc. For 12-volts or 110-volts. 

This 12-volt PIR motion sensor has an adjustable timer that allows you to trigger any 12-volt appliance, light, motor, etc. Automatically resets itself everytime!

Control the speed of your motor from stop all the way to full bore! Unlike other dimmers, our Electric Motor Speed Controller will not make a humming noise when used. Great for Rocking Chair Mechs! Specifications:Operating voltage: DC 12V-40VControl...

The Houdini Budget Prop Controller (Download the Houdini Budget Prop Controller manual)       This amazing prop controller does everything you want, for an incredible price!  With 2 outputs, you can control two separate...

If you want to control 110-volt props (rather than 12 or 24-volt props), simply attach this adapter to your Houdini controller, and plug it into the wall. Now you have two programmable outlets for your 110-volt props!

Control your 12-volt lights and motors with this sturdy 12-Volt dimmer / speed controller. Controls up to a hefty 8 amps! Simply wire the device betwen your power coming from the outlet (or power pack) and your motor or lights. Turn dial to adjust speed...

Foot Switch Trigger These heavy-duty foot switch triggers, are made of heavy-duty steel, with non-skid base and foot treadle pads, and comes with 15-foot leads. They are available with the exclusive LADC connector, or with stripped and tinned leads. The...

Step Mat Trigger Pressure sensitive mat detects when a guest walks on it, and triggers your prop. This is a must have in your Halloween arsenal of trigger props! Step Mat Trigger Flexible and water-resistant. 22"x14".

PIR Motion Trigger These sensors have a 16' cable and can detect passive infrared heat and motion when guests walk by. They will never know what hit them. This is one of the ultimate sensors in your repertoire of Halloween arsenal haunt. PIR Motion...

This electric mechanism requires no air compressor. Simply attach it to a rocking chair and plug it in. Gives the illusion of ghost rocking an empty chair, or set a skeleton on the chair for an interactive experience. Please note that due to the...